Rear Mount Pumpers

Eliminates fog, frost and improves overall visibility through the side windows with small, nearly invisible wires laminated into the glass. Kit includes easy-to-install heated glass for driver and officer side windows.

Protects like no other with the industry’s #1 rated safety system.

• Outboard Sensors
  • Detects multi-angle impacts allowing faster deployment of airbags with sensors mounted on the outer perimeter of the cab.
• Side Impact Protection
  • Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.
• Driver Knee Airbags
  • Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.
• Full Side Curtain Airbags
  • Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.
• Advanced Seatbelts
  • Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Enhances energy efficiency and reduces emissions with the ability to automatically shut down the main engine, while allowing the APU to start up routinely.

• Comes in 3 available models:
  • 12 volt system
  • 8 kw unit
  • 16 kw unit
• Additional benefits:
  • Compact size
  • Low maintenance
  • Units will heat and cool cab and charge the batteries
  • 270 amp Leece Neville alternators for 12 volt charging

Provides decades of corrosion protection through hot-dip galvanizing, one of the most maintenance-free and economical corrosion-protection systems available. Particularly beneficial for trucks in Northern climates that are regularly exposed to snow/ice melt chemicals.

Allows for easy control and operation without manual processes or calculations. Once the pump is engaged and water is flowing, state-of-the-art electronics monitor components in a ready state. The system injects foam into the water and air into the appropriate discharge, sensing foam/water flow and eliminating slug flow.